書誌事項
- タイトル別名
-
- Torsion of Bars with Polygonal Cross-Sections
- ポリゴン ダンメンジク ノ ネジリ
この論文をさがす
抄録
The term "Polygonal Cross-Section" is given for a non-circular but continuosly curved cross-section. This profile is produced by the lathe tool which is reciprocated laterally, and synchronized with the revolution of main spindle. And the standard type of the profile is produced by the simple harmonic motion of the tool. We can use a pair of polygonal shaft and boss for the power transmission coupling. First of all, in this report, we touch on the theoretical analysis of the torsion of the bars with this profile. The shear stress, twisting moment and twist angle in the torsion of this bar are calculated approximately on the basis of Saint Venant theory. Next, some results of experiment are presented. It is shown that the analytical results agree satisfactorily with the experimental ones and can be used as the design formula.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 30 (212), 515-521, 1964
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680134334592
-
- NII論文ID
- 110002352041
- 110002462667
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 24242675
- 00290270
-
- NDL書誌ID
- 9151343
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可