非円形歯車の転造法 : 第2報, 歯車素材を変位させる場合

DOI Web Site Web Site

書誌事項

タイトル別名
  • Die-Rolled Noncircular Gears : Part 2, In the Case of Gear Blanks Being Shifted
  • ヒエンケイ ハグルマ ノ テンゾウホウ 2

この論文をさがす

抄録

In the last report under the similar title, a rolling method of noncircular gears was treated in that a die holder with two dies was fitted on the tool rest of a lathe and the tool rest was pushed toward the gear blank. In this report, a die holder with a die was fitted on the tool rest of a lathe, then the tool rest was pushed toward the gear blank which was shifted in the rectangular plane of the gear blank shaft. Elliptic gears were made by the above-mentiond equipment, and aluminium and steel were used as the materials of gears.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ