Kinetics of Reduction Step of Wustite to Iron in Gaseous Reduction of Quaternary Calcium Ferrite

Bibliographic Information

Other Title
  • 4成分系カルシウムフェライトのガス還元におけるウスタイトから鉄への還元速度
  • 4 セイブンケイ カルシウム フェライト ノ ガス カンゲン ニ オケル ウス

Search this article

Abstract

As a fundamental study for clarifying the reduction phenomena of sintered ore in a blast furnace, quaternary calcium ferrite was synthesized from chemical reagents of Fe2O3, CaCO3, SiO2, and Al2O3 and the kinetic behavior at the final stage of reduction of the quaternary calcium ferrite with CO and H2 gas was studied.<BR>The results obtained are summarized as follows: <BR>(1) Reduction rate increased with an increase in temperature both in CO and H2 reductions. The increase of reduction rate with temperature was not very large above 900°C but it was remarkably large between 800°C and 900°C.<BR>(2) Reduction at 900°C and above proceeded topochemically both in macro- and microstructures. At 800°C, the reduction did not proceed topochemically but rather homogeneously.<BR>(3) Reduction data at 900°C and above were analyzed based on the unreacted-core model. Reduction curves calculated by using the rate parameters obtained by the analysis agreed with the observed data very well. Temperature dependencies of the chemical reaction rate constant kc and the effective diffusivity in the product layer De were given by following equations: <BR>kcCO = exp (13.28-164.9×103/RT ) (m/s) (1 1731 273 K)<BR>DeCO = exp (-7.16-32.07×103/RT ) (m2/ s) (1 1731 273 K)<BR>kcH<SUB>2</SUB>= exp (3.62-55.83×103/RT ) (m/s) (1 1731 273 K) <BR>DeH<SUB>2</SUB>= exp (-3.61-53.91×103/RT) (m2/s) (1 1731 273 K)

Journal

  • Tetsu-to-Hagane

    Tetsu-to-Hagane 77 (10), 1569-1576, 1991

    The Iron and Steel Institute of Japan

Citations (4)*help

See more

References(2)*help

See more

Details 詳細情報について

Report a problem

Back to top