アルミニウム箔を利用した軟鋼のアルミナイズ処理

DOI Web Site Web Site 被引用文献18件 参考文献20件

書誌事項

タイトル別名
  • Aluminizing Treatment of Mild Steel Using Aluminum Foil
  • アルミニウム ハク オ リヨウ シタ ナンコウ ノ アルミナイズ ショリ

この論文をさがす

抄録

To obtain the ductile and corrosive coating treatment for steel, the aluminizing treatments using aluminum foil on mild steel surface were performed at diffusion temperature from 700 to 1000°C. The foil aluminized steels had less voids in diffusion layers, than the hot-dip aluminized steels. The foil aluminized steels at diffusion temperature not higher than 800°C had a thinner brittle layer of aluminum rich intermetallic Fe2Al5, and that at diffusion temperature not lower than 900°C had thicker layers of iron rich intermetallics such as FeAl and Fe3Al. It was found that the three body abrasive wear rates of aluminized steels with FeAl and Fe2Al that diffused at not lower than 900°C against free SiC grains were smaller wear rate than those of the steels diffused at higher than 800°C.

収録刊行物

  • 鉄と鋼

    鉄と鋼 89 (12), 1227-1232, 2003

    一般社団法人 日本鉄鋼協会

被引用文献 (18)*注記

もっと見る

参考文献 (20)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ