コールド・モデルによる底吹き転炉内スラグ,メタルの混合速度

DOI Web Site Web Site 被引用文献18件 参考文献1件

書誌事項

タイトル別名
  • Cold Model Study on the Mixing Rates of Slag and Metal Bath in Q-BOP
  • コールド モデル ニヨル ソコブキ テンロナイ スラグ メタル ノ コンゴウ

この論文をさがす

説明

Synopsis:<BR>Water model experiments have been conducted to clarify mixing rates of molten steel and mass transfer rates between slag and metal in Q-BOP with a particular emphasis on the comparison with those of LD.<BR>Complete mixing time of molten steel determined by a tracer dispersion technique is, respectively, 23 to 26 sec for Q-BOP, and 100 to 200 sec for LD. This indicates that the stirring intensity in Q-BOP is remarkably larger than that of LD when compared with the same flow rate of gas. A simple relationship obtained between the mixing time, τ (sec), the flow rate of gas, Q(Nl/min) and the number of tuyeres, N is τ=41.80 (Q/N)-0.33, from which it is clear that the flow rate of gas per tuyere should be increased to realize the better mixing. Mass transfer capacity coefficient between slag and metal designated by the product of the mass transfer coefficient and the interfacial area, kBa, is given by kBa=3.49 × 10-5 Q3 for Q-BOP and by kBa=-1.53 × 10-5 Q3 for LD, respectively. Through these results, it can safely be concluded that the mass partition between slag and metal in Q-BOP is more closely linked to the thermodynamic equilibrium than that of LD.

収録刊行物

  • 鉄と鋼

    鉄と鋼 66 (9), 1307-1316, 1980

    一般社団法人 日本鉄鋼協会

被引用文献 (18)*注記

もっと見る

参考文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ