非水溶媒浴を用いた亜鉛系合金の電析機構の検討

書誌事項

タイトル別名
  • Verification of Deposition Mechanism of Zinc Alloys Using Non-aqueous Plating Solutions
  • ヒスイヨウバイヨク オ モチイタ アエンケイ ゴウキン ノ デンセキ キコウ ノ ケントウ
公開日
2003
DOI
  • 10.2355/tetsutohagane1955.89.1_64
公開者
一般社団法人 日本鉄鋼協会

この論文をさがす

説明

Electrodeposition of Zn alloys with iron-group metals, Cr and Mn was conducted in non-aqueous solutions such as methanol and N, Ndimethlyfromamide and the alloy deposition behavior was compared with that in aqueous sulfate solutions. The results obtained are described as follows:<BR>1) The electrodeposition behavior of Zn-iron-group metals and Zn-Cr alloys, in which the formation of Zn hydroxide due to pH rise in the cathode layer plays an important role during the codeposition process in aqueous solutions, was quite different between the non-aqueous and aqueous solutions.<BR>2) The deposition of Zn-iron-group-metal alloys in the non-aqueous solutions showed the typical feature of normal type codeposition, in which electrochemically more noble iron-group metal deposits preferentially over most plating conditions.<BR>3) In the codeposition of Zn with Cr, the deposits of about 90 mass% Cr was obtained in the non-aqueous solutions containing 80-90mol% of Cr3+, while the maximum Cr content was about 40 mass% in aqueous solutions.<BR>4) Since Zn hydroxide was not involved in the codeposition of Zn with Mn in aqueous solution, the deposition behavior of Zn-Mn alloy in the non-aqueous solutions was almost the same as that in aqueous solution.

収録刊行物

  • 鉄と鋼

    鉄と鋼 89 (1), 64-70, 2003

    一般社団法人 日本鉄鋼協会

被引用文献 (20)*注記

もっと見る

参考文献 (35)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ