ステンレス発色皮膜の性質に及ぼす発色条件の影響

書誌事項

タイトル別名
  • Effects of Coloring Conditions on the Properties of the Film for Colored Stainless Steels
  • ステンレス ハッショク ヒマク ノ セイシツ ニ オヨボス ハッショク ジョウ

この論文をさがす

説明

Colored films on the stainless steel, formed by the alternating current electrolyzing (ACE) method and the conventional one (INCO method), have been studied to clarify the differences in the structure, rub resistance and polarization resistance of them. In the ACE method, the effects of electrolyzing patterns on the color tone and polarization resistance of the film have been investigated.<BR>The results obtained are as follows:<BR>(1) The film formed by the ACE method has the higher Cr content, the more uniform Cr dispersion and the better rub resistance than that of the conventional one.<BR>(2) The polarization resistance of the film measured by AC impedance method is proportional to its thickness, and is higher in the ACE method than that in the conventional one.<BR>(3) The growth behaviour of the film by the ACE method depends on the electrolyzing condition for coloring; increasing type of electrolysis current leads to thinner thickness and higher polarization resistance of the film in comparison with those obtained by the decreasing pattern.

収録刊行物

  • 鉄と鋼

    鉄と鋼 77 (8), 1367-1372, 1991

    一般社団法人 日本鉄鋼協会

被引用文献 (1)*注記

もっと見る

参考文献 (5)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ