減圧下における酸化剤粉体上吹脱炭による脱窒の促進

書誌事項

タイトル別名
  • Acceleration of Nitrogen Removal with Decarburization by Powdered Oxidizer Blowing under Reduced Pressure
  • ゲンアツカ ニ オケル サンカザイ フンタイジョウ スイダッタン ニ ヨル ダ

この論文をさがす

抄録

A new refining method has been developed for producing ultra low nitrogen steels. Powdered oxidizer was blown onto the molten steel using a special top lance with the argon gas under reduced pressure. As the results, it was found that the nitrogen removal index increased twice as much as that in the oxygen gas blowing and the final nitrogen content could be lowered below 10 ppm easily. The reasons why the satisfactory nitrogen removal was obtaind by using this new method are considered as summarised below.<BR>(1) The gas-metal interfacial area was increased to twice or five times as large as that the oxygen gas blowing due to the formation of large number of fine CO bubbles during the powdered oxidizer blowing. (2) The oxygen content was maintained at a low level, because the oxidizer efficiency of decarburization reaction was quite high due to the existence of oxidizer particles as nuclei of CO bubble-formation which were penetrated deeply in the molten steel.

収録刊行物

  • 鉄と鋼

    鉄と鋼 73 (2), 313-320, 1987

    一般社団法人 日本鉄鋼協会

被引用文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ