鉄鉱石焼結鉱の気孔形成過程とそのモデル化

書誌事項

タイトル別名
  • Pore Forming Process on Iron Ore Sinter and Its Model
  • テッコウセキ ショウケツコウ ノ キコウ ケイセイ カテイ ト ソノ モデルカ

この論文をさがす

抄録

On the controlling factors for sinter qualities, sinter porosity plays an important role together with the mineral composition. The present work was carried out to study on sinter pore and its forming mechanism by pot tests and to develop the sinter porosity evaluation model.<BR>Pores in sinter were formed as the pores in raw mix bed were changed and redistributed by the forming sinter melt. predicted porosity in sinter was described by the melting ratio of raw materials and the fluid index of sinter melt. Sinter porosity was measured on the small open pores below 0.5 mm in diameter and the all closed pores by JIS method.<BR>The calculated porosities by the model were in good agreement with the observed ones.

収録刊行物

  • 鉄と鋼

    鉄と鋼 73 (7), 804-811, 1987

    一般社団法人 日本鉄鋼協会

被引用文献 (6)*注記

もっと見る

参考文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ