磁気混合流体を用いた円管内面マイクロ加工の開発研究

DOI

書誌事項

タイトル別名
  • Study of Micro Processing for Inner Tube Walls Utilizing Magnetic Compound Fluid

抄録

The purpose of this study is to propose the micro processing method for inner wall tube with difficulty of cutting its material and to investigate its processing characteristics. The magnetic compound fluid mixed with abrasive grains is poured into a tube, and a ring-shaped permanent magnet stacked in the processing tool is inserted and rotated in the tube. The changes of their internal diameter, their circularity and their material removal were investigated using the tool with different length of the magnet. In addition, in order to clarify the processing mechanism, we performed processing experiments without reciprocating motion of the tube and the visualization experiment. We clarified that the internal diameter increases and the material removal changes proportionally at time. After processing the surface became like a mirror. Judging from processing experiments and visualization experiments without reciprocating motion, the tube may be processed by abrasive grains that are retained on the magnetic clusters at the side of the permanent magnet.

収録刊行物

  • 実験力学

    実験力学 12 (4), 361-368, 2012

    日本実験力学会

詳細情報 詳細情報について

  • CRID
    1390282680165713536
  • NII論文ID
    130004489817
  • DOI
    10.11395/jjsem.12.361
  • ISSN
    18844219
    13464930
  • 本文言語コード
    en
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ