書誌事項
- タイトル別名
-
- One Proposal of Traction Control in Electrical Type 4WD
- デンキシキ 4WD ニ オケル トラクションコントロール ノ イチ テイアン
この論文をさがす
説明
The hybrid electric vehicle has been advanced for environmental problems. It is realized an improvement in fuel efficiency by balancing both the characteristics of an electric motor and an internal combustion engine. In our laboratory, the hybrid electric vehicle has been remodeled from a commercial engine vehicle. Authors are also advancing research that focuses on improving the exercise performance by using engines with two electric motors. The hybrid electric vehicle is a four-wheel-drive vehicle (4WD). Authors are aiming to achieve the method of traction control of 4WD. In order to suppress slip at the time of idling wheel, it is controlled the rotation speed of wheels by using both the mechanical mechanism of the center differential gear and characteristic of the electric motor (generator). The characteristic of this system suppress the rotation of the front wheel by using a generator as an electric motor when the front wheel slipping. Then, this generator is attached to the rear wheel’s output side of the transfer. Slip ratio is detected by using the rotational speed difference between the front wheels and rear wheels. In this paper, authors introduce the principle of the proposed methods and remodeling manufacturing process that was performed in order to achieve the traction control. In addition, it is reported the experiment results.
収録刊行物
-
- パワーエレクトロニクス学会誌
-
パワーエレクトロニクス学会誌 41 (0), 88-94, 2015
パワーエレクトロニクス学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680196378240
-
- NII論文ID
- 130005255057
-
- NII書誌ID
- AA11921199
-
- ISSN
- 18843239
- 13488538
-
- NDL書誌ID
- 027304572
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可