Laminar-Turbulent Transition of an Inlet Boundary Layer in a Circular Pipe Induced by Periodic Injection (Shape of Isolated Turbulent Patches and Their Growth)

DOI DOI Web Site Web Site BIBCODE 2 Citations 17 References Open Access

Bibliographic Information

Other Title
  • 周期的吹き出しによる円管助走部境界層の乱流遷移（孤立乱流塊の形状と成長）

Description

The laminar-turbulent transition of a boundary layer induced by a jet injection in the inlet region of a circular pipe was experimentally investigated. The jet was periodically injected radially from a small hole in the inlet region into the pipe flow. Axial velocity was measured by a hot-wire anemometer. The turbulence induced by the jet within the boundary layer developed into turbulent patches which then grew in the axial, circumferential and radial directions downstream. The shape of the patches shown by the intermittency factor in the diametrical plane was similar to the turbulent spot in the flat plate boundary layer at first, then became similar to the turbulent slug in the pipe flow developed downstream. The turbulent patches protruded from the boundary layer after they grew and reached the circumferential opposite side, although they stayed within the boundary layer as long as the shape was turbulent spot-like in the diametrical plane. The propagation velocity at the leading edge became faster than the cross-sectional velocity, though it turned slower at the trailing edge. Therefore, the growth rate of its axial length varied downstream. The growth rate of the patches' circumferential length was smaller than that in the turbulent spot under zero pressure gradient and was almost the same as the spot under favorable pressure gradient.

Journal

Citations (2)*help

See more

References(17)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top