Effects of MgAl2O4-ZrO2 Addition on Sintering Behaviors and Mechanical Properties of Silicon Nitride Ceramics.
-
- YANG Jian-Feng
- National Industrial Research Institute of Nagoya
-
- ZHANG Guo-Jun
- National Industrial Research Institute of Nagoya
-
- OHJI Tatsuki
- National Industrial Research Institute of Nagoya
-
- NIIHARA Koichi
- Institute of Scientific and Industrial Research, Osaka University
Bibliographic Information
- Other Title
-
- 窒化ケイ素セラミックスの焼結と機械的特性に及ぼすMgAl<sub>2</sub>O<sub>4</sub>-ZrO<sub>2</sub>添加の影響
Search this article
Abstract
The influences of the sintering additive content of MgAl2O4-ZrO2 (total 5-15mass% with a MgAl2O4/ZrO2 ratio 1:1) on sintering behaviors, microstructure and mechanical properties of Si3N4 ceramics were investigated. Sintering was carried out in the temperature range of 1200 to 1900°C. Densification was enhanced with increasing sintering additive content due to an improved particle rearrangement; however, phase transformation and grain growth were significantly suppressed. The phase transformation and grain growth occurred through a solution-reprecipitation mechanism controlled by a diffusion process in this additive system. With the addition of a small amount of the above-mentioned additive mixture (5mass%), both high flexural strength and high fracture toughness could be obtained.
Journal
-
- Journal of the Ceramic Society of Japan
-
Journal of the Ceramic Society of Japan 108 (1260), 697-700, 2000
The Ceramic Society of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282680224187008
-
- NII Article ID
- 110002289883
-
- NII Book ID
- AN10040326
-
- ISSN
- 18821022
- 09145400
-
- NDL BIB ID
- 5433707
-
- Text Lang
- en
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed