Na(Co, Cu)<sub>2</sub>O<sub>4</sub>と (Ba, Sr)PbO<sub>3</sub>を用いた酸化物熱電変換素子

  • 申 宇〓
    産業技術総合研究所シナジーマテリアル研究センター
  • 村山 宣光
    産業技術総合研究所シナジーマテリアル研究センター
  • 池田 晃一郎
    (株) ノリタケカンパニーリミテド研究開発センター
  • 左合 澄人
    (株) ノリタケカンパニーリミテド研究開発センター
  • 寺崎 一郎
    早稲田大学理工学部応用物理学科

書誌事項

タイトル別名
  • Thermoelectric Device of Na(Co, Cu)2O4 and (Ba, Sr)PbO3.

この論文をさがす

抄録

The thermoelectric device of oxide p-n coupled element of NaCo1.7Cu0.3O4 and Ba0.2Sr0.8PbO3 has been fabricated using direct joining between p-type and n-type. Because of unwanted reaction between the two p- and n-type oxides, the diffusion barrier of Au foil was used and the device was stable and showed no appreciable contact resistance at the junction after the thermal cycle at 1000 K in air. The TE maximum power from the device was 12.5 mW when the temperatures of the hot and cold side of the device were 1045 K and 539 K, respectively. The device showed neither appreciable contact resistance at the junction nor changes in thermopower, after the high-temperature durability test in air.

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (15)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ