ホットプレス法により作製した LaPO<sub>4</sub> 被覆アルミナ繊維/アルミナマトリックス複合材の 高温機械的性質
書誌事項
- タイトル別名
-
- Fracture Behavior of Monazite-Coated Alumina Fiber-Reinforced Alumina-Matrix Composites at Elevated Temperature
この論文をさがす
説明
High-temperature strength, fracture behavior and microstructure were observed for monazite-coated alumina fiber-reinforced alumina matrix composites hot-pressed at 1200-1300°C. The composites with 27-41 vol% alumina fiber showed no significant change in strength at 25-1100°C. However, the strength of the composites decreased markedly at a test temperature higher than 1100°C. The composites hot-pressed at a temperature lower than 1250°C fractured in a pseudoductile manner in the test temperature range from 25°C to 1100°C. Young's modulus of the elastic region decreased with increasing test temperature. These composites showed larger deformation at a test temperature above 1100°C. On the other hand, the composites hot-pressed at more than 1250°C fractured in a brittle manner at 25°C-1200°C of test temperature. The fracture energy of the composite increased with increasing test temperature and decreased with sintering temperature.<br>
収録刊行物
-
- Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌)
-
Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌) 112 (1312), 628-633, 2004
公益社団法人 日本セラミックス協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680225917568
-
- NII論文ID
- 110002292235
-
- NII書誌ID
- AN10040326
-
- ISSN
- 18821022
- 09145400
-
- NDL書誌ID
- 7173493
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- OpenAIRE
-
- 抄録ライセンスフラグ
- 使用不可