大型油圧システムのバルブボックス内の分岐通路に発生する過渡的異常高圧

DOI Web Site Web Site 参考文献7件

書誌事項

タイトル別名
  • Transient Unexpected High-Pressure Surge Produced in the Branch Passage in a Valve Box of Large Hydraulic Systems
  • オオガタ ユアツ システム ノ バルブ ボックスナイ ノ ブンキ ツウロ ニ ハッセイスル カトテキ イジョウ コウアツ

この論文をさがす

説明

With large hydraulic systems, a transient unexpected high-pressure surge often occurs in the branch passage of an auxiliary valve in the valve box at the transition of the working cycle. This pressure surge reaches 5 to 6 times that produced in the main line, and may occasionally give rise to system failure. This paper presents experimental and SMA simulation analyses for the fluid transients produced at the beginning stage of the decompression cycle of a large hydraulic casting machine, and physically elucidates the generation mechanism of the unexpected high-pressure surge. Measures for prevention of these pressure surges are also presented, and their effectiveness is verified by experiment. A simplified method of estimation of the unexpected high-pressure surge is proposed for various kinds of hydraulic systems, and its usefulness is verified by experiments carried out on testing of small hydraulic pipeline systems. In addition, a new calculation method is proposed for applying the SMA method to cases where there is a hydraulic casting machine in which the system consists of several hydraulic complex pipelines connected by several non-linear hydraulic components and column separation occurs at the inner point of the complex pipeline. From comparison of the simulation results with the experimental results, it is shown that the simulation accuracy of this calculation method is very high.

収録刊行物

参考文献 (7)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ