-
- ハルス ラクサナ グントル
- 東京工業大学大学院メカノマイクロ工学専攻
-
- 蔡 茂林
- 東京工業大学精密工学研究所
-
- 川嶋 健嗣
- 東京工業大学精密工学研究所
-
- 香川 利春
- 東京工業大学精密工学研究所
書誌事項
- タイトル別名
-
- The Effect of Temperature Recovery Time on the Repeatability of a Differential Pressure Type Air Leak Tester
- サアツシキ モレ ケイソク ソウチ ノ サイゲンセイ ニ タイスル オンド カイフク ジカン ノ エイキョウ
この論文をさがす
抄録
Differential pressure type air leak testers are widely used in industry due to their suitability for automation, low manufacturing cost, accuracy of 2% FS and applicability for leaks as small as 1.7×10-10m3/s. We developed a differential pressure type leak tester, modified the circuit and investigated its characteristics. In the previous differential type air leak tester, the temperature recovery time was set to be constant for various test pressures and volumes. We found that different test pressure and volume required a different temperature recovery time to obtain the expected repeatability and accuracy. Detailed investigation showed that the higher the test pressure and the bigger the volume, the longer temperature recovery time was required to obtain the expected repeatability and accuracy. We also demonstrated the effect of temperature recovery time on repeatability by comparing the normal chamber and copper wire stuffed isothermal chamber. The result showed that the copper wire stuffed isothermal chamber suppressed uncertainty.
収録刊行物
-
- 日本フルードパワーシステム学会論文集
-
日本フルードパワーシステム学会論文集 38 (4), 54-59, 2007
一般社団法人 日本フルードパワーシステム学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680231363456
-
- NII論文ID
- 10024634058
-
- NII書誌ID
- AA11597760
-
- ISSN
- 13467719
- 13497022
- 18803121
-
- NDL書誌ID
- 8891888
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可