Efficient Generation and Detection of a Guided Wave in a Pipe using Guided Wave Reflectors

DOI Web Site 被引用文献5件 参考文献6件
  • NISHINO Hideo
    Institute of Engineering and Science, The University of Tokushima
  • TANAKA Yasuhiro
    Institute of Engineering and Science, The University of Tokushima
  • KATO Yasuhisa
    Institute of Engineering and Science, The University of Tokushima
  • YOSHIDA Kenichi
    Institute of Engineering and Science, The University of Tokushima

抄録

A simple and effective method for generation and detection of a guided wave in a pipe was proposed using an iron hose-fixing belt as a reflector of the guided wave. The reflector is located (2n+1)λ/4 (n=1,2,3,,,) apart from a guided wave sensor in axial direction for the effective generation or detection in the magneto-strictive transduction. The reflector setting is determined under the consideration to the distance between the sensor and the reflector as well as phase inversion at the reflector. In above reflector setting, large amplitude is obtained because multiple-reflection between the reflector and the sensor occurs under phase matching conditions. In this paper, the principle of the method was first described. Experiments were carried out with the non-dispersive T(0,1) mode to verify the principle in comparison to a simple theory.

収録刊行物

  • JSMME

    JSMME 3 (2), 267-277, 2009

    一般社団法人 日本機械学会

被引用文献 (5)*注記

もっと見る

参考文献 (6)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ