泳動電着法による管状多孔質アルミナ基板上へのランタンコバルタイト緻密酸化物薄膜の作製

根岸 秀之, 大島 徳夫, 原谷 賢治, 榊 啓二, 池上 徹, 井手本 康, 小浦 延幸, 柳下 宏

doi:10.2109/jcersj.114.36

書誌事項

タイトル別名

Preparation of Thin and Dense Lanthanum Cobaltite Coating on Porous Tubular Alumina Supports by Electrophoretic Deposition

この論文をさがす

説明

The electrophoretic deposition (EPD) process is one of several ceramic powder assembling technologies using a simultaneous colloidal process and electrochemical driving force. For the further development of the EPD technique, the possibility and the usefulness of preparing a thin and dense ceramic coating on non-electronically conductive porous tubular ceramics using the EPD technique was investigated. La_0.8Sr_0.2Co_0.8Sr_0.2O_3-δ (LSCF) was used as the deposition material and a porous alumina tube was used as the deposition substrate. Methanol (MeOH) was suitable as a dispersing medium for the LSCF powder. LSCF particles were positively charged in MeOH. For the fabrication of a uniform EPD layer, the cathode was placed in a porous alumina tube. The insides of the porous alumina tubes were filled with MeOH and the cathode did not make contact with the EPD bath. A 30 μm (200 g/m²) thick uniform LSCF powder coating was obtained by EPD at 100 V for 10 min. After sintering at 1500°C for 5 h, a 20 μm dense membrane was obtained.<br>

収録刊行物

Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌)

Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌) 114 (1325), 36-41, 2006

公益社団法人日本セラミックス協会

キーワード

詳細情報詳細情報について

書き出し

問題の指摘