建築用陶磁器素地の緻密化過程に関する研究 (第4報)

DOI 機関リポジトリ 機関リポジトリ (HANDLE) Web Site Web Site

書誌事項

タイトル別名
  • Study on the Densification Process of Pottery Body for Building Construction (Part 4)
  • ケンチクヨウ トウジキ キジ ノ チミツカ カテイ ニ カンスル ケンキュウ
  • Influence of Particle Size of Feldspar on the Densification
  • 長石の粒度が素地の緻密化に与える影響

この論文をさがす

説明

Using the isothermal method, the influence of type and particle size of feldspar, a flux component, on the densification process was investigated in the feldsparquartz-kaolinite system which was a representative ceramic composition for building construction. Type of feldspar greatly influenced the vitrification temperature. Sodium feldspar vitrified 40°C lower than potassium feldspar. This is attributed to the different viscosities of the liquid of feldspar. The particle size of feldspar also greatly influenced vitrification; the coarser the particle size, the higher the vitrification temperature was. In addition, it was clarified that the bulk density of the body at the vitrification point decreased as the particle size of feldspar became coarser. These results indicate that the dispersion state of feldspar changes due to its particle size in the body and the coarser the particle, it requires a higher temperature because liquid phase should widely disperse to fill the body and as the increase of temperature, gas pressure of the closed pores increases lowering the density of the body.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ