FRP板水中接着曲げ補強RC梁の耐荷性能に及ぼす補強量の影響

DOI 機関リポジトリ HANDLE Web Site オープンアクセス
  • 三上 浩
    三井住友建設(株) 技術開発センター
  • 栗橋 祐介
    室蘭工業大学大学院 社会基盤ユニットくらし環境系領域
  • 小室 雅人
    室蘭工業大学大学院 社会基盤ユニットくらし環境系領域
  • 岸 徳光
    釧路工業高等専門学校

書誌事項

タイトル別名
  • Effects of plate volume on load-carrying capacity of flexural reinforced RC beam with submerged FRP plate
  • FRPバン スイチュウ セッチャク マゲ ホキョウ RCリョウ ノ タイカ セイノウ ニ オヨボス ホキョウリョウ ノ エイキョウ

この論文をさがす

抄録

In this study, in order to investigate the effects of plate volume on load-carrying capacity and debonding behavior of the reinforced RC beams with submerged FRP plate, the static four-point loading tests were conducted taking material properties and mass of FRP plate as variables. Bonding capacity of the adhesive was also investigated comparing with the experimental results for RC beams reinforced with the same adhesive under the dry condition. From this study, the following results were obtained: 1) flexural load-carrying capacity of the RC beams can be improved by increasing plate volume with limitation; 2) plate debonding may be restrained by applying FRP plate with high Young's modulus and/or increasing axial stiffness of the plate; 3) FRP plate was debonded due to the peeling action of the tip of the diagonal shear cracks irrespective of treatment with/without sand coating and material properties of the FRP plate.

収録刊行物

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ