気体粘性計測用振動子のオゾンガス暴露による周波数-圧力特性の変化

書誌事項

タイトル別名
  • The Effect of Ozone Exposure on the Frequency-Pressure Characteristics of an Oscillator for Gaseous Viscosity Measurements
  • キタイ ネンセイ ケイソクヨウ シンドウシ ノ オゾンガス バクロ ニ ヨル シュウハスウ-アツリョク トクセイ ノ ヘンカ

この論文をさがす

抄録

  The effect of exposure to ozone on the frequency shift (ΔF) and pressure (P) of a quartz oscillator was observed to check its resistance against the gas. After every ozone exposure, the ΔF-P characteristic curves shifted toward lower frequencies, indicating that the oscillator lost its repeatability. The oscillator electrode consisted of an Au-Cr film deposited on a quartz substrate; an evaluation using a scanning electron microscope (SEM) showed that each film layer had a thickness of 65 nm. The surface composition of the electrode was analyzed by Auger electron spectroscopy (AES). The AES intensities of Cr and Au showed that Cr oxide was present on top of the Au film layer; we speculate that ozone exposure may proceed the Cr oxidation with higher atomic valence. AES depth analysis showed that a small amount of Cr was detected in the Au film layer; we believe that Cr oxidation could progress by either Cr diffusion through the Au layer or by O diffusion from the surface.<br>

収録刊行物

参考文献 (13)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ