書誌事項
- タイトル別名
-
- Preparation of Standard Carbon Black for the Artificially Soiled Cloths. II.
- ジンコウ オセンフ チョウセイヨウ ヒョウジュン カーボンブラック ノ シサク 2 シサク セイゾウ ナラビニ シサクヒン ノ セイノウ
- Preparation Method and Properties of Carbon Black
- 試作製造ならびに試作品の性能
この論文をさがす
説明
From the result of previous study authors found that suitable amount of oily matter on the particle surface is a necessary factor for the standard carbon black and that the difference of raw material's quality or preparing method is not important factors.<BR>Considering this result, authors prepared a simple combustion furnace of lampblack method type.<BR>Preparation of the carbon black with ample amount of oily matter and uniformity on the quality was always successful when naphthalene was burned at 400500°C in this furnace by the adjustment of ventilator. The prepared carbon black was extracted with acetone for 40 hours to adjust the amount of oily matter on the particle surface, and then it was compared with the Tamagawa C carbon. The characteristics of the prepared carbon black were superior than Tamagawa's in the following points;<BR>1. The diameter of the primary particle size was smaller.<BR>2. The deviation of particle size was less.<BR>3. The amount of oily matter was more.<BR>4. The quality of soiled cloths was more uniform.<BR>5. The difference in detersive efficiency between washing in water and washing in soap solution appeared nearly the same as that of Tamagawa's in the case of soiling by machine, but appeared much more in the case of soiling by hands.
収録刊行物
-
- 油化学
-
油化学 15 (12), 623-628, 1966
公益社団法人 日本油化学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680310409216
-
- NII論文ID
- 130001009317
-
- NII書誌ID
- AN00245435
-
- ISSN
- 0513398X
- 18842003
-
- NDL書誌ID
- 8467211
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可