大深度円形立坑の地中連続壁における設計用土圧に関する一考察

書誌事項

タイトル別名
  • A STUDY OF EARTH PRESSURES ON DIAPHRAGM WALLS OF DEEP CIRCULAR SHAFTS
  • ダイシンド エンケイ タテコウ ノ チチュウ レンゾクヘキ ニ オケル セッケイヨウ ドアツ ニ カンスル イチ コウサツ

この論文をさがす

抄録

 In new projects at great depths, the ratio of the construction cost of a shaft to the total project cost has been increasing. However, because no specific design method has been established, the method for small- and medium-depth projects has been applied to temporary diaphragm walls for great-depth circular shafts. In these circumstances, the design load has been determined without sound scientific reasons. In the study presented in this paper, working earth pressures were estimated from stress resultant in the direction of the horizontal section of diaphragm wall, calculated using measurement data, and the estimated earth pressures were simulated by FEM analysis considering initial plastic deformation, to review the method of setting earth pressure in the design of diaphragm walls of great-depth circular shafts. As a result, the earth pressure coefficient was set at about 0.2, which ensures stability of the ground at great depths. In addition, this paper summarizes the concept of the method for setting design earth pressures as a function of the N value.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ