Preparation and Structural Control of Porous Hydroxyapatite.
-
- SATO Teisuke
- Dept. of Mech. Eng., Tokushima Univ.
-
- BESSHI Tatsuo
- Tokushima Pref. Ind. Tech. Cent.
-
- KORI Toshinari
- Tokushima Pref. Ind. Tech. Cent.
-
- HATANO Atsuo
- Dept. of Mech. Eng., Tokushima Univ.
-
- TAMATANI Junji
- Dept. of Mech. Eng., Tokushima Univ.
Bibliographic Information
- Other Title
-
- 多孔質アパタイトの製造と組織制御
- タコウシツ アパタイト ノ セイゾウ ト ソシキ セイギョ
Search this article
Description
The porous hydroxyapatite ceramics with various porosity values were prepared using molten wax colloidal process. Graphite powders were used as combustible pore-forming agents. The total porosity of porous hydroxyapatite increased with the graphite content added. The total porosity, mean pore sizes were controlled by changing the content of graphite, the mean graphite particle diameter and sintering temperature. Most of the pores in the resulting ceramics were regarded as the open pores. The flexural strength of porous ceramics markedly decreased with the total porosity.
Journal
-
- Journal of the Society of Materials Science, Japan
-
Journal of the Society of Materials Science, Japan 51 (6), 637-641, 2002
The Society of Materials Science, Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390282680368432768
-
- NII Article ID
- 110002301913
-
- NII Book ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL BIB ID
- 6189670
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed