鋳込み成形の基礎的研究

DOI Web Site

書誌事項

タイトル別名
  • Fundamental study of slip casting.
  • イコミ セイケイ ノ キソテキ ケンキュウ

この論文をさがす

抄録

Generally, a slip casting process is closely related to the flocculation state of particles. The present investigation was undertaken in order to understand the relationship between the flocculation state of particles and the packing structure on the surface of gypsum mold.<br>The flocculation state of particles in Al2O3-slurry was discussed on the basis of rheological behavior as a function of dispersant concentration. As the result, it was found that the type of rheological properties was classified into three modes.<br>For these slurries, the absorbing rate and pressure of water and the increase of packing layer thickness were measured in order to explain the packing structure on the surface of mold. From these results, it was shown that the most suitable condition for slip casting could be prepared by using a weakly flocculated slurry.

収録刊行物

  • 材料

    材料 36 (410), 1172-1175, 1987

    公益社団法人 日本材料学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ