セラミック円筒部材のトリップ熱衝撃応力に対する強度推定と最適信頼性設計

書誌事項

タイトル別名
  • Strength Estimation and Optimum Reliability Design of Ceramic Cylinder Component Subjected to Thermal Shock at Trip
  • セラミック エントウ ブザイ ノ トリップ ネツ ショウゲキ オウリョク ニ タイスル キョウド スイテイ ト サイテキ シンライセイ セッケイ

この論文をさがす

抄録

Ceramic parts such as a combustor of gas turbine requires the design considering strength reliability, because ceramics are easily fractured by thermal stress due to rapid changes of temperature. Therefore, it is essential to estimate the thermal shock stress and is also necessary to control the cooling rate of ceramic parts. In this paper, the thermal stresses at trip and steady state in a ceramic combustor liner are analyzed numerically by using a simple ceramic cylinder model, which is heated from the inside and is cooled from the outside. The propability of failure of a ceramic cylinder subjected to thermal stresses both at trip and steady state is also analyzed theoretically. As a result, the thermal shock stress at trip decreases with the increase in cooling rate at steady state. However, because the thermal stress at steady state increases with the increase in cooling rate, the cooling rate at steady state should be optimized to minimize the propability of failure in the ceramic cylinder system, considering the thickness of cylinder.

収録刊行物

  • 材料

    材料 54 (1), 13-18, 2005

    公益社団法人 日本材料学会

参考文献 (21)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ