塩化ビニールテープ起因応力腐食割れ試験および割れ寿命解析の試み

書誌事項

タイトル別名
  • PVC Tape Induces Stress Corrosion Cracking Test and Estimation of Cracking Potential of Every Pipes
  • エンカ ビニールテープ キイン オウリョク フショク ワレ シケン オヨビ ワレ ジュミョウ カイセキ ノ ココロミ

この論文をさがす

説明

The morphology of cracks, the chemical adhesions on the cracks, large residual stresses in pipes, and the location of cracks restricted to pipes of short hot water flow were reported in the previous paper. It was also found that the tempe rature depending peaks in chloride production was caused by the properties of FeCl3. Semi-quantitative expression of the chloride production was proposed.<br>A four points bending stress test was performed on the steel plates with the baked on PVC tape in humid air at 80°C. It is found that the baked PVC tape is the most harmful in 50% humid air, and its harm is same as NaCl in 100% humid air. The highest possible stress in pipes and the highest possible atmospheric temperature surrounding pipes is estimated to be 200MPa and 40°C, respectively. By taking both temperature- and stress-dependences into consideration, the SCC curve relating PVC-tape-induced-contamination for pipes in stagnant was established.<br>Under the assumption of linear damage rule in stress corrosion cracking phenomena, damage to be accumulated in 60 years to pipes with fluids of various temperature and duration were calculated and a damage contour was graphed with a fluid temperature ordinate and a flow duration abscissa. The fluid conditions of major pipes at the Ikata-1 nuclear power plant, which had not received the full inspection, were positioned on so low area on the damage contour that the plant was estimated to be safe for the coming forty years.

収録刊行物

  • 材料

    材料 53 (2), 136-142, 2004

    公益社団法人 日本材料学会

参考文献 (8)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ