端部切欠きをもつ一方向不連続繊維強化プラスチックの破壊基準

DOI Web Site 参考文献8件

書誌事項

タイトル別名
  • Fracture Criteria for Unidirectional Discontinuous Fiber Reinforced Plastics with Side Notches
  • タンブ キリカキ オ モツ 1ホウコウ フレンゾク センイ キョウカ プラスチック ノ ハカイ キジュン

この論文をさがす

抄録

This paper discusses the fracture criteria for predicting the strength of unidirectional discontinuous glass fiber reinforced composites with side-notches. The point stress criterion (PSC) for notched composites was employed so that the Tsai-Hill criterion for orthotropic materials is satisfied. The fracture criterion proposed on the basis of linear notch mechanics (LNM) proposed by Hyakutake et al. was also discussed in association with the above two criteria. Strength of intact and notched unidirectional composites was experimentally obtained for various kinds of off-axis angle and notch depth. The stress concentration factor in the vicinity of a notch was calculated with the use of finite element analysis. It was found that the notched to intact strength ratio is almost independent of off-axis angle though it slightly depends on notch depth. The characteristic length for the PSC estimated through the above experimental and analytical results increases with increasing off-axis angle and notch depth. The critical maximum stress of the LNM-based criterion was shown to be a function of fiber orientation angle, but almost independent of notch depth. The LNM criterion was proved to be equivalent to the PSC that satisfies the Tsai-Hill criterion.

収録刊行物

  • 材料

    材料 57 (7), 725-731, 2008

    公益社団法人 日本材料学会

参考文献 (8)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ