ボールミル粉砕について  湿式・乾式粉砕の比較

書誌事項

タイトル別名
  • Rate Constants of Wet and Dry Ball Mill Grindings
  • ボール ミル フンサイ ニ ツイテ シッシキ カンシキ フンサイ ノ ヒカク

この論文をさがす

抄録

To investigate ball mill grinding from the kinetic point of view, the effects of hardness of samples, feed weight and feed size on the grinding rate constant of weight fraction decrease of feed have been studied.<br>The samples used were silica glass, borosilicate glass, quartz, feldspar, limestone, marble and talc. The pebble mill consisted of a 12.8cm-diameter by 13.2cm-long cylinder and the grinding medium was 40 balls of 3cm diameter having the total weight of 1180g. In the case of wet grinding, 400cc-water was added to the mill. The test were done at the speed of 88.1% of critical one. The experiments were performed on 10 different particle sizes from 4 to 100 mesh for dry grinding and on 8 different ones from 8 to 100 mesh for wet grinding to obtain the grinding rate constants. The following results were obtained.<br>Dry; K1=0.02HV-0.23·(WS/WB)-1.5·(xf/x0)<br>Wet; K1=0.06HV-0.23·(WS/WB)-1·(xf/x0)0.7<br>where K1 is the first order decreasing rate constant of weight fraction of feed, HV the dimensionless Vickers hardness, WS the feed weight, WB the ball weight, xf the feed size and x0 the optimum feed size.

収録刊行物

  • 材料

    材料 27 (298), 663-666, 1978

    公益社団法人 日本材料学会

被引用文献 (4)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ