ガラス状高分子圧延異方性材のクレイズ発生

DOI Web Site

書誌事項

タイトル別名
  • Craze Initiation in Rolled Glassy Polycarbonate
  • ガラスジョウ コウブンシ アツエン イホウセイザイ ノ クレイズ ハッセイ ポ
  • ポリカーボネイト

この論文をさがす

説明

The crazing phenomenon is one of the most interesting problems in the field of polymer engineering science. Many investigations have been carried out to clarify a criterion for craze initiation. The experiments under conditions of uniaxial and biaxial stress states have showed a critical stress or strain criterion. Almost all of these experiments have been carried out by use of isotropic polymers.<br>It is the purpose of this paper to investigate the craze initiation criterion and yield behavior of anisotropic polycarbonate plates obtained by cold rolling. The stresses of craze initiation and yielding and the craze direction were measured as a function of orientation angle between the tensile axis and the rolling direction, under tension in the presence of kerosene.<br>The results are summarized as follows.<br>(1) Elastic modulus increases with an increase in rolling reduction.<br>(2) Critical crazing strain for rolling direction increases considerably with an increase in rolling reduction.<br>(3) Craze direction varies with the orientation angle. This trend can be explained by the maximum principal strain theory.

収録刊行物

  • 材料

    材料 25 (277), 974-978, 1976

    公益社団法人 日本材料学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ