書誌事項
- タイトル別名
-
- X-Ray Stress Measurement of Two Phase Stainless Steel by Monochromator Method
- モノクロメータ ニヨル 2ソウ ステンレス コウ ノ Xセン オウリョク ソク
この論文をさがす
説明
The X-ray stress measurement of austenitic phase was carried out on two-phase stainless steels, such as ferrite austenite stainless steel and strain-induced metastable austenitic stainless steel, by using the monochromator method. This method was performed by setting a graphite plain crystal between the receiving soller slits and the detector. The results obtained are as follows.<br>(1) X-ray diffraction from Fe(211) by CrKα can be completely eliminated, when the graphite monochromater is set at CrKβ and γFe(311) is analyzed.<br>(2) By using the monochromator method, the X-ray intensity decreases to 1/4∼1/7 compared with the case without it, but the S/N ratio improves from 0.1 to 4.<br>(3) The monochromator method is particularly useful for the X-ray stress measurement of SUS 304 rolled materials and welded materials which shows wider half value breadth than 2° or texture.
収録刊行物
-
- 材料
-
材料 27 (294), 221-225, 1978
公益社団法人 日本材料学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680396185344
-
- NII論文ID
- 110002299408
-
- NII書誌ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL書誌ID
- 1932993
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可