潮の干満部での鋼材に対する電気防食効果

DOI Web Site Web Site 被引用文献2件

書誌事項

タイトル別名
  • Effects of Cathodic Protection on Steel Surface in Tidal Zone
  • シオ ノ カンマンブ デ ノ コウザイ ニ タイスル デンキ ボウショク コウカ

この論文をさがす

説明

In order to investigate the effects of cathodic protection on steel surface exposed in tidal zone, the following tests were conducted with mild steel plates.<br>Correlations between immersion time ratios (to total exposure time) and protective effects were investigated for steel plates, of which the potentials were kept within three ranges of -900mV- -1, 000mV, -1, 000mV-1, 100mV and -1, 200mV with reference to sea-water Ag/AgCl electrode by coupling them to galvanic anodes of Zn, Al and Mg.<br>Protective effects were calculated from the difference of weight losses between protected plates and unprotected ones.<br>Results obtained are as follows.<br>1) The protective effects are 95-98% in all the three potential ranges, if the immersion time ratios are above 95%.<br>2) The average protective effects are 50-60% if the immersion time ratios are within the range of 40-90%, but the more negative the potentials, the higher the effects.<br>3) The protective effects are much smaller if the immersion time ratios are below 40%, but in the potentials of -900mV- -1, 000mV the effects are comparatively higher, and so it is necessary to use other corrosion control associated with cathodic protection especially in these environments.

収録刊行物

被引用文献 (2)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ