超音波疲労試験機を用いたZr<sub><font size="-1">55</font></sub>Al<sub><font size="-1">10</font></sub>Ni<sub><font size="-1">5</font></sub>Cu<sub><font size="-1">30</font></sub>金属ガラスの超高サイクル疲労特性

DOI Web Site 参考文献13件

書誌事項

タイトル別名
  • Ultra-High Cycle Fatigue Properties in Zr<sub><font size="-1">55</font></sub>Al<sub><font size="-1">10</font></sub>Ni<sub><font size="-1">5</font></sub>Cu<sub><font size="-1">30</font></sub> Metallic Glassy Alloy Using Ultrasonic Fatigue Testing Machine
  • チョウオンパ ヒロウ シケンキ オ モチイタ Zr ₅ ₅ Al ₁ ₀ Ni ₅ Cu ₃ ₀ キンゾク ガラス ノ チョウコウサイクル ヒロウ トクセイ

この論文をさがす

抄録

In this work, the ultra-high cycle fatigue behavior of Zr55Al10Ni5Cu30 metallic glass was investigated by using ultrasonic fatigue testing method. Test alloy rods with a diameter of 8mm were prepared by tilt-casting with copper mold. Test specimens were machined to hourglass shape type (the minimum diameter ; 2.0mm), and after machining the surface of specimens was manually polished with polishing paste. The specimens were tested at a frequency of 20kHz under a stress ratio of -1. The fatigue limit (σw) (half a total stress amplitude) and fatigue ratio (σw/σB) of the alloy showed 893MPa and 0.53, respectively. Furthermore, we did not see any fish-eye like crack-growth morphology on fracture surfaces. The initiation region of fatigue crack was always observed at the side surface of the specimens. A viscous-flow fracture region with large dimples between the fatigue crack-growth region and the final unstable fracture region was observed. This peculiar fracture morphology may be due to adiabatic heating of the metallic glass specimens during the fracture, resulting in transition to supercooled liquid, under extremely high frequency of fatigue stress using ultrasonic loading.

収録刊行物

  • 材料

    材料 62 (3), 191-196, 2013

    公益社団法人 日本材料学会

参考文献 (13)*注記

もっと見る

関連プロジェクト

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ