書誌事項
- タイトル別名
-
- Study of Static Load Sensing using PVDF
- アツデン フィルム オ モチイタ セイ カジュウ ケンシュツ ニ カンスル コウサツ
この論文をさがす
抄録
It's possible to measure static load using piezoelectric film by sticking 2 sheets of identical films together. When one of the films is oscillated at its resonant frequency, the other film generates voltage by following up to the motion of the actuator film. The vibration of the body is suppressed due to the impressed load, and then the sensor voltage drops according to the magnitude of the load. Vibration analysis proved that the configuration of the vibration of the sensor body is not bending but in-plane expansion and contraction. It's also turned out that the characteristics of the sensor voltage are dominated not by the magnitude of the load but by the contact area of the load with the film. Therefore introducing the lamination material, which alters the contact area according to the magnitude of the load, will improve the sensitivity and the linearity of the sensor voltage to the load.
収録刊行物
-
- 日本AEM学会誌
-
日本AEM学会誌 22 (3), 413-418, 2014
日本AEM学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680482239744
-
- NII論文ID
- 130004699796
-
- NII書誌ID
- AN10457520
-
- ISSN
- 21879257
- 09194452
-
- NDL書誌ID
- 025846651
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可