Development of a Variable-bale-diameter-type Chamber for TMR (Part 2)

DOI
  • KAWAIDE Tetsuo
    NARO Institute of Livestock and Grassland Science, Nasushiobara
  • SHITO Hirokatsu
    NARO Institute of Agricultural Machinery, Bio-oriented Technology Research Advancement Institution
  • TACHIBANA Yasuhiro
    NARO Institute of Agricultural Machinery, Bio-oriented Technology Research Advancement Institution

Bibliographic Information

Other Title
  • 可変径式細断物成形機構の開発（第2報）
  • ——試作機の改良とTMR成形試験——
  • ——Improvement of Prototype and TMR Forming Test——

Search this article

Description

In this paper, we improved the variable-bale-diameter-type chamber for TMR (Total Mixed Ration). TMR forming capacity was 10-16t/h. We confirmed that the prototype could form TMR roll-bales varied in the range of 0.8-1.0m in diameter, with different materials and combination, in order to supply TMR with mass of 300-500kg. The densities of each roll-bales were over 300kg/m3. Standard deviations of roll-bales mass were improved to 0-4kg by weighing the materials before feeding to the prototype chamber. The maximum PTO power was 11kW, while forming TMR roll-bale. The average loss rate was 1% during forming and wrapping. We were not able to form higher density TMR roll-bale by doubling the force of the gas-springs which presses the bar-chain.

Journal

Keywords

Details 詳細情報について

  • CRID
    1390282680491987840
  • NII Article ID
    130006943552
  • DOI
    10.11357/jsamfe.77.2_122
  • ISSN
    21890765
    2188224X
  • Text Lang
    ja
  • Data Source
    • JaLC
    • CiNii Articles
  • Abstract License Flag
    Disallowed

Report a problem

Back to top