書誌事項
- タイトル別名
-
- Suppression of tool wear in diamond turning of steel (Effect of microstructure of carburized steel)
- Suppression of Tool Wear in Diamond Turning of Steel
説明
<p>Diamond cutting tools show severe wear in turning of steels. In previous paper, it was shown that carbides on ferrite phase, which were precipitated by carburization, suppressed the diamond tool wear. In this paper, detailed distribution of constituents of the carbides was analyzed by EDS (energy-dispersive X-ray spectroscopy). In addition, characteristics of each carbide such as occupancy, diameter, and degree of circularity were measured. Results indicate that those characteristics of the carbides influence suppression of the tool wear.</p>
収録刊行物
-
- 日本機械学会論文集
-
日本機械学会論文集 83 (856), 17-00161-17-00161, 2017
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680493662208
-
- NII論文ID
- 130006282099
- 130007162316
-
- ISSN
- 21879761
- 24243094
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- OpenAIRE
-
- 抄録ライセンスフラグ
- 使用不可
