Study on Suppression of Load Swing with Gust for Rotary Crane

説明

In this paper we propose a neural network as a controller (NC) for suppression of load swing with disturbance like a gust in a rotary crane system. The rotary crane system has structure which rotates around the vertical axis. Then, the rotary crane system is a nonholonomic system. In general, it is difficult for nonholonomic system to design the classical control method using a static continuous state feedback law. So, it is necessary for nonholonomic system to design a time-varying feedback controller or a discontinuous feedback controller. Previous research had been successful in constructing the suppression controller of the load swing with a single initial rotation angle and three initial rotation angles when a gust occurred. The NC optimized by genetic algorithm (GA) had good control performance, but could not stabilize the load swing in the untrained condition. The control purpose of this paper is to improve the performance of the NC optimized by GA when the gust occurred at random.

収録刊行物

  • SCIS & ISIS

    SCIS & ISIS 2010 (0), 1543-1546, 2010

    日本知能情報ファジィ学会

詳細情報 詳細情報について

  • CRID
    1390282680565505536
  • NII論文ID
    130005019529
  • DOI
    10.14864/softscis.2010.0.1543.0
  • 本文言語コード
    en
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ