MANUAL CALCULATION METHOD OF EMBEDMENT STIFFNESS OF PARTIAL COMPRESSION PARALLEL TO THE GRAIN AND ITS STRENGTH PROPERTIES
-
- NOGUCHI Masahiro
- Postdoctoral Fellow, Institute of Wood Technology, Akita Prefectural University, Dr. Agr.
-
- NAKAMURA Noboru
- Prof., Institute of Wood Technology, Akita Prefectural University, Dr. Agr.
-
- IIJIMA Yasuo
- Prof., Institute of Wood Technology, Akita Prefectural University, Dr. Agr.
Bibliographic Information
- Other Title
-
- 縦部分圧縮の支圧剛性の算定法の提案と強度特性
- タテ ブブン アッシュク ノ シアツ ゴウセイ ノ サンテイホウ ノ テイアン ト キョウド トクセイ
Search this article
Abstract
We, in this article, propose a manual calculation method of the embedment stiffness of partial compression parallel to the grain. The calculation method was derived from the mechanical model based on the mechanics. The embedment displacement was thought as the series system, surface of the timber at the bearing parts, and timber deformation. The timber deformation was modeled using the mechanics, assuming the stress diffusion angle was 18 degree. The validity of the proposed calculation method was confirmed by the experimental results whose parameters were the size effect, the length of timber, and the edge distance of timber. Using the average stiffness of the each condition, the calculation stiffness and experimental results were good coincident. And the size effect factor of the embedment strength of partial compression parallel to the grain was derived from the experimental results.
Journal
-
- Journal of Structural and Construction Engineering (Transactions of AIJ)
-
Journal of Structural and Construction Engineering (Transactions of AIJ) 76 (662), 803-809, 2011
Architectural Institute of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282680580069504
-
- NII Article ID
- 130004752424
-
- NII Book ID
- AN10438559
-
- ISSN
- 18818153
- 13404202
-
- NDL BIB ID
- 11074539
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed