書誌事項
- タイトル別名
-
- S111042 Fundamental Discussions on Internal-Gear Skiving
抄録
Gear skiving is not a new method. It is a gear cutting method with a gear-type tool in which work- and tool-gears mesh with each other with a shaft angle between their axes, and the tool-gear is fed along the work-gear axis. The shaft angle yields flank sliding along a gear axis which can play a cutting action. Therefore, skiving can be expected to realize a high productive gear cutting method especially for internal gears. The present paper describes an example of tool edge shapes which are calculated on the basis of the gearing theory.
収録刊行物
-
- 年次大会
-
年次大会 2012 (0), _S111042-1-_S111042-2, 2012
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680816904704
-
- NII論文ID
- 110009993611
-
- ISSN
- 24242667
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可