G120013 表面温度に基づく伝達関数を用いた熱変形予測([G12001]設計工学・システム部門一般セッション)

DOI Web Site

書誌事項

タイトル別名
  • G120013 Prediction of thermal deformation by using transfer function based on surface temperature

抄録

The purpose of this paper is to estimate thermal deformation of machine tool model by using transfer function with time delay. The machine tool model is a symmetric gate type that combines two L character type materials. We assume that a left L character type material is the tool side and a right material is the construction side. It thinks between those to be a cutting area. The prediction method of thermal deformation based on frequency domain is constructed from transfer function between specified surface temperatures and the relative displacement in cutting area. The relative displacement in cutting area is predicted using two specified surface temperatures near heat source in machine tool model. As a result, the method can be predicted with enough certainty at what rate the temperature changes the most rapidly on machine's startup transient behavior. The method proposed in this paper is remarkably effective to estimate thermal deformation and confirm that the error between experimental and estimated values will be remarkably reduced.

収録刊行物

  • 年次大会

    年次大会 2011 (0), _G120013-1-_G120013-3, 2011

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ