書誌事項
- タイトル別名
-
- Maximum Reduction of Axial Forging Load in Cold Upsetting with Torsion Die Motion
抄録
<p>To reduce the axial forging load in cold upsetting process, torsional oscillation was superposed with axial forging load. A cylindrical aluminum workpiece was simultaneously compressed with a maximum speed of 0.1 mm/s in z direction and twisted with a maximum angular speed of 0.5 rpm around the z-axis at room temperature. In case of the aluminum workpiece with an initial aspect ratio (height/diameter) of 1.0, a maximum reduction in the axial load was found to be approximately 80% for a rotation/compression speed of approximately over 300 °/mm.</p>
収録刊行物
-
- 年次大会
-
年次大会 2017 (0), G0400405-, 2017
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680819533056
-
- NII論文ID
- 130006549852
-
- ISSN
- 24242667
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可