G1300101 ホブ切り用水溶性切削油剤に関する基礎的研究 : 各種コーティング工具の摩耗挙動に及ぼす影響

DOI Web Site

書誌事項

タイトル別名
  • G1300101 Fundamental Research on Water-Soluble Cutting Fluid for Hobbing : Influence on Tool Wear Behavior of Various Coated HSS Tools

説明

This paper deals with the influence of water-soluble cutting fluid on tool life (flank wear) of various coated cutting tools and finished surface roughness compared with dry cutting and water-insoluble cutting oil in hobbing. Experiments were conducted by simulating hobbing by fly tool cutting on a milling machine. The following results were clarified. (1) In the conditions of 1-thread and 3-thread hobs, the water-soluble cutting fluid used in the tests prolongs the tool life of TiSiN- and AlCrSiN-coated tools compared with that obtained with dry cutting and the water-insoluble cutting oil. (2) The water-soluble cutting fluid used in the tests is effective for all of various coated tools in the term of finished surface roughness. (3) From the viewpoints of tool life and finished surface roughness, the water-soluble cutting fluid is suitable for TiSiN- and AlCrSiN-coated tools.

収録刊行物

  • 年次大会

    年次大会 2015 (0), _G1300101--_G1300101-, 2015

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ