書誌事項
- タイトル別名
-
- 1009 Effect of Processing Condition on Mechanical Properties of Maraging Steel by Selective Laser Melting
抄録
In this work, the influence of processing condition on relative density and mechanical properties of specimens prepared by Selective Laser Melting (SLM) technique using 18-Ni maraging steel powder was investigated. The results show that it is necessary to control laser energy density of about 65-80 J/mm^3 to obtain SLM specimens with relative density higher than 99.9%. In addition, it was confirmed that mechanical properties of dense SLM specimens were less influenced by building direction on the base plate.
収録刊行物
-
- 北陸信越支部総会・講演会 講演論文集
-
北陸信越支部総会・講演会 講演論文集 2016.53 (0), _1009-1_-_1009-4_, 2016
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680846130048
-
- NII論文ID
- 110010045713
-
- ISSN
- 24242772
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可