-
- SEKISUGI Naoya
- Graduate School of Science and Engineering, University of Toyama
-
- OGUMA Noriyasu
- 富山大学大学院理工学研究部
-
- ODAKE Yasuhiro
- (株)不二越軸受事業部
-
- SHIMADA Yuuki
- (株)不二越軸受事業部
Bibliographic Information
- Other Title
-
- OS1302 軸受鋼の回転曲げ疲労におけるFGA形成時期の検討
Abstract
In order to examine the period of fine granular area (FGA) formation of bearing steel in high cycle fatigue, rotating bending fatigue tests were carried out at the stress amplitude 1100MPa below the fatigue limit. The tests were interrupted at the cumulative damage value ranging from 0.1 to 0.5 with an increment of 0.1 to charge hydrogen. And then the fatigue tests were continuously carried out. Although FGA was observed on the fracture surface in all conditions, FGA was not formed in all specimens. The stress intensity factor range of FGA tended to increase with an increase of the cumulative damage value. Therefore, FGA is considered to be gradually formed to limit size with advance of fatigue.
Journal
-
- The Proceedings of the Materials and Mechanics Conference
-
The Proceedings of the Materials and Mechanics Conference 2013 (0), _OS1302-1_-_OS1302-3_, 2013
The Japan Society of Mechanical Engineers
- Tweet
Details 詳細情報について
-
- CRID
- 1390282680850432384
-
- NII Article ID
- 110009936712
-
- ISSN
- 24242845
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed