235 FPB処理を施した純銅摩擦攪拌接合継手の機械的特性(溶接・接合)

DOI Web Site オープンアクセス

書誌事項

タイトル別名
  • 235 The mechanical property of the pure copper friction stir welding connector with FPB treatment

説明

In this research, in order to extend the scope of the friction stir welding, the junction experiment of pure copper was conducted. It succeeded in joining by optimization of the welding conditions such as tool rotation speed or welding speed. As a result of measuring junction temperature, value lower than fusing point of the copper chosen as material was shown, and it became clear that it is junction of a solid phase state. Furthermore, in the mechanical property, tensile strength higher than TIG welding which is a method of joining conventional copper was shown. However, the hardness of the joined portion was low. FPB treatment was performed for improvement in the reliability of junction material. The hardness test and the tension test were carried out. As a result, the mechanical property was improved by performing FPB treatment.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ