D19 目標制御出力に着目したセミアクティブ振動制御(M-OS2-3 セミアクティブ制御,M-OS2 建築・建設構造物の耐震・免震・制振,「海を越え,国を越え,世代を超えて!」)

書誌事項

タイトル別名
  • D19 Semi-active Control of Structural Systems with a Targeted Control Output

抄録

As a method for semi-active control of structural systems, the active-control-based method that emulates the control force of a targeted active control law by semi-active control devices has been studied. In the active-control-based method, the semi-active control devices are not necessarily able to generate the targeted active control force because of the dissipative nature of those devices. In such a situation, the meaning of the targeted active control law becomes unclear in the sense of the control performance achieved by the resulting semi-active control system. In this study, a new semi-active control strategy that approximates the control output (not the control force) of the targeted active control is proposed. The variable parameter of the semi-active control device is selected at every time instant so that the predicted control output of the semi-active control system becomes close to the corresponding predicted control output of the targeted active control as much as possible. Parameters of the targeted active control law are optimized in the premise of the above "output emulation" strategy so that the control performance of the semi-active control becomes good and the "error" of the achieved control performance between the targeted active control and the semi-active control becomes small.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ