夾炭層岩石の抗砕力について

DOI Web Site Web Site

書誌事項

タイトル別名
  • On the Chipping Strength of Coal Measures Rocks
  • キョウタンソウ ガンセキ ノ コウサイリョク ニ ツイテ
  • 抗碎力と破砕特性との関連性
  • Relation between chipping strength and fracturing characteristics

この論文をさがす

抄録

The authors analysed fracturing characteristics in rocks by the percussion drilling of coal-measures rocks from 21 coal mines in Japan, and they investigated an index that determines the volume of cuttings on the fracturing tests by the pendulum hammer type test machine.<BR>The stress waves are measured by means of wire strain gauge on the midway of long rod when the rocks were struck by standard bit and carried out, the chipping resistance in relation to the waves of incidence and reflection.<BR>On the surface of rock specimens the individual and multiple percussion blows were performed under various conditions. The weight of cuttings is given as follows:W=ηθ/4D{h(kv-F0)}α where W: weight of cuttings on the multiple blows, θ: angle of rotation, D: diameter of the fracturing hole, ν: velocity of blow, F0: critical energy of blow, ρ: specific density of rock, h: coefficient of crater depth, η: correct coefficient of the fracturing depth, α: correct index of the fracturing depthk: unit chipping strength<BR>From the above, it was found that the fracturing characteristics in rocks were not experimentally defined without several indexes besides a unit chipping strength.

収録刊行物

  • 日本鑛業會誌

    日本鑛業會誌 75 (858), 1089-1096, 1959

    一般社団法人 資源・素材学会

詳細情報 詳細情報について

問題の指摘

ページトップへ