Design and Installation of Plasma Arc Melting Apparatus.
-
- UEJO Satoru
- Production Engineering department, Technical administration division, Nikko Kyodo Co., LTD.
-
- KOSHIMIZU Hiroyuki
- Hitachi refinery, Nippon Mining & Metals Co., LTD.
-
- HANABUSA Takashi
- Production Engineering department, Technical administration division, Nikko Kyodo Co., LTD.
-
- CHIBA Yasunori
- Production Engineering department, Technical administration division, Nikko Kyodo Co., LTD.
-
- KIMURA Takehiro
- Plasma spray technical center, Nagata Tekko Co., LTD.
-
- IKEDA Takashi
- Plasma spray technical center, Nagata Tekko Co., LTD.
-
- MAEDA Masafumi
- Institute of industrial science, University of Tokyo
Bibliographic Information
- Other Title
-
- プラズマアーク溶解装置の試作
Description
Plasma arc melting apparatus having very low leak rate was designed and installed for melting and casting of reactive metal based intermetallic compound such as TiAI or Nb 3A1.<BR>It is equipped with one plasma torch of maximum output of 20 kW in continual operation and can be operated under adjusted pressure ranged from 6, 000 to 101, 325Pa using inert gas such as Ar or Ar-He mixture.<BR>To verify the leak rate of this apparatus, titanium is melted and the contents of oxygen and nitrogen in titanium was monitored.<BR>Approximate 80g of titanium was melted on the copper crucible under 70V of plasma arc voltage, 130A of arc current and 60 kPa of high purity argon gas.<BR>The increasing rate of nitrogen in titanium determined by chemical analysis was 0.05ppm/s and agreed with that calculated from the leak rate measured.
Journal
-
- Shigen-to-Sozai
-
Shigen-to-Sozai 109 (10), 823-826, 1993
The Mining and Materials Processing Institute of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282680994236416
-
- NII Article ID
- 130004285817
-
- COI
- 1:CAS:528:DyaK2cXhslShsr0%3D
-
- ISSN
- 18806244
- 09161740
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed
