1001 微視的相変態モデルの有限要素法への適用及びSMAフィルム引張り試験によるその検証(S03-1 形状記憶合金の特性と応用技術(1),21世紀地球環境革命の機械工学:人・マイクロナノ・エネルギー・環境)

DOI Web Site

書誌事項

タイトル別名
  • 1001 Application of a Micromechanical Phase Transformation Model to FEM and Its Verification by Tensile Tests for SMA Films

抄録

A micromechanical phase transformation model of shape memory alloys (SMA) was introduced in the finite element analysis to calculate the deformation of two or three-dimensional elements. To verify the finite element model, tensile tests for SMA films were performed. The load-displacement relationship and temperature distribution during the loading and unloading were measured and compared with the numerical result. The temperature distribution visualizes the phase transformation because the martensitic transformation is exothermic whereas the reverse transformation is endothermic. The load-displacement relationship was non-linear and had a hysteresis loop. The numerical result could capture such a deformation behavior. Several diagonal higher temperature bands appeared in an SMA film during the loading. The numerical result could not capture them well. Further modification is needed in the finite element model.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ